Introduction to Ice Bath Water Maintenance

Why Water Maintenance Is Important

Maintaining clean water in your ice bath is essential for both hygiene and the proper functioning of your ice bath system. Clean water ensures a better cold plunge experience and extends the life of your equipment, particularly if you're using a chiller system.

Challenges of Regularly Changing Water

Not everyone has easy access to clean water for frequent draining and refilling of their ice bath. This is especially challenging for units placed in locations without convenient water access. Proper maintenance allows you to extend the life of your water without compromising on cleanliness or hygiene.

Step One: Pre-Plunge Hygiene

Showering Before Entering the Ice Bath

One of the simplest yet most effective ways to extend the life of your ice bath water by weeks is to shower before using the ice bath. This pre-plunge hygiene step is crucial for maintaining water quality and reducing the strain on your filtration system.

How Pre-Rinse Helps Prevent Contamination

Showering removes excess hair, fluff, and lint that builds up on your body throughout the day. You'd be surprised how much of this material can enter the water and eventually clog up your chiller system. A quick rinse before plunging significantly reduces these contaminants.

Step Two: Cleaning Your Feet Before Entering

Using a Small Bucket of Water or a Towel

Keep a small bucket of clean water or a towel near your ice bath to clean your feet before entering. This simple step can dramatically reduce the amount of dirt and debris that enters your ice bath.

How Dirty Feet Impact Water Quality

It's remarkable how much dirt, lint, and debris sticks to your feet and washes off as soon as you enter the water. This material quickly builds up in your filter system. By wiping or rinsing your feet before entering, you can extend the life of your paper filter by weeks and maintain clearer water.

Step Three: Skimming the Water Regularly

Using a Spa Scoop to Remove Debris

A simple spa scoop is an invaluable tool for maintaining clean ice bath water. Use it to skim the surface of the water and catch floating debris before it can enter your filtration system.

How Often to Skim Your Ice Bath

For personal use, skim the surface after each plunge or at least once or twice a week. If your ice bath is in a high-traffic area with multiple users, more frequent skimming may be necessary. This simple practice removes a surprising amount of contaminants.

Why Skimming Helps Maintain Filtration

By removing surface debris before it enters your chiller system, you're significantly reducing the buildup in your filtration system. This keeps your water clearer and cleaner while reducing the frequency of filter changes. Always replace the lid after skimming to prevent additional debris from entering the water.

Step Four: Maintaining Your Filters

Replacing the Paper Filter Regularly

For systems like the Stoic Ice Bath with a chiller, the paper filter is the main collector of buildup in the water. It's recommended to change this filter once a month for single daily use. These filters are available on the Ritual Recovery website on a subscription basis or included in the six-monthly maintenance box.

Cleaning the Metal Particulate Filter

In addition to the paper filter, your system also has a metal particulate filter that serves as a secondary catchment for debris. This filter should be removed and washed regularly to protect the mechanics of the chiller system.

Recommended Cleaning Schedule Based on Usage

For personal use with one daily plunge, changing the paper filter once a month is typically sufficient. However, if your ice bath is in a high-traffic area with 10-20 people using it daily, you'll need to change the filter approximately once per week or even more frequently.

Step Five: Using a Maintenance Box for Water Treatment

What's Included in the Six-Monthly Maintenance Box

Ritual Recovery offers a comprehensive six-monthly maintenance box that includes everything needed to maintain your ice bath water chemistry. The box contains six paper filters, test strips to check water quality, and various water treatment products for optimal water balance.

Should You Use Chemicals?

Using chemicals is a personal preference. While some prefer to avoid chemicals altogether, they can be necessary if you don't have the ability to regularly drain and refill your tub. The products included in the maintenance box are selected to be as natural as possible with low chlorine content. If you do use products, please stick to the products we provide as they have been verified by the manufacturer to be safe to use with the product.

How to Test and Balance Water Chemistry

The key to water maintenance is balancing the pH of your water to keep it hygienic—not too acidic and not too alkaline. The maintenance box includes everything you need to test and adjust your water chemistry for optimal cleanliness.

Step Six: Using Water Treatment Products (If Needed)

Using Test Strips to Check Water pH

The maintenance box includes 5-in-1 pool test strips. To use them, simply dunk a strip in the water, wait a moment, and then compare the colors to the chart provided. This tells you the current state of your water chemistry and indicates which products you may need to add.

Adding Spa Shock to Treat Water

When first filling your ice bath, add some Spa Shock according to the dosage instructions on the container (you'll need a very small amount for the approximately 360-liter volume of most ice baths). This initial treatment helps establish clean water.

Using pH Reducer or Alkaline Enhancer

Based on your test strip results, you may need to add either pH reducer or alkaline enhancer to balance your water chemistry. Add the recommended dose according to the test results, wait 15 minutes, and then test again to ensure proper balance.

Recommended Testing Frequency

For personal ice bath use (once daily or every other day), testing the water chemistry every two weeks to once a month is usually sufficient. Adjust this schedule based on your usage patterns and how long you're keeping the same water in your ice bath.

Step Seven: Recap of the Five Key Maintenance Steps

1. Shower Before Using the Ice Bath

Take a quick shower before entering your ice bath to remove excess hair, lint, and other contaminants from your body that could otherwise end up in the water and filtration system.

2. Wipe or Rinse Feet Before Entering

Keep a small bucket of water or a towel near your ice bath to clean your feet before entering, minimizing the dirt and debris that enters your water.

3. Skim the Water Regularly

Use a spa scoop (included with every Stoic Ice Bath purchase) to skim debris from the water surface daily or after each use, and always replace the lid afterward.

4. Replace Paper Filters and Clean Metal Filters Regularly

Change your paper filter monthly for personal use or weekly for high-traffic settings, and regularly clean the metal particulate filter inside your chiller.

5. Use a Maintenance Box for Long-Term Water Quality

Consider using the six-monthly maintenance box from Ritual Recovery to extend the life of your water, especially if regular draining and refilling is challenging. This comprehensive solution works with any ice bath brand and includes everything needed to maintain clean, hygienic water for approximately six months.

Get genuine replacement filters and water maintenance products for your ice bath at Ritual Recovery — ensuring optimal performance and longevity.